DIY Ventilation
You can build a ventilation system for your ELEGOO resin printer yourself. The files are free. You don't need to buy anything from us.
What you need
- 1 or 2 fans — 80mm or 120mm PC-style
- 3" or 4" flexible duct (hardware store)
- M3×45mm screws (quantity 8)
- M3 hex nuts (quantity 4)
- M3×10mm screws (quantity 4)
- The printed adapter parts (free, below)
Print the adapter, connect the fan, run the duct out a window. The system pulls fumes out at the source and vents them outside.
Free files
Printables
All models are free to download.
- VENT120 — 120mm fan system
- VENT80 — 80mm fan system
- ELEGOO 75mm exhaust port to 4" duct magnetic adapter
- All 3D Venting models on Printables
Cults3D
- ELEGOO 75mm exhaust port to 4" duct magnetic adapter
- 120mm fan ventilation system, fan brackets with 4" duct attachment
- Fan brackets with 4" and 3" duct attachment adapters
- ELEGOO Centauri Carbon and Centauri 2 — 4" duct exhaust adapter
- 4" duct adapter for the BOFA 3D PrintPRO 1, 2 and 3
- FDM 3D printer enclosure 4" vent outlet
- Dollar Store airbrush spray booth
- All 3D Venting models on Cults3D
Questions
If you get stuck or want to talk through your setup, reach out on our contact page. We're happy to help.
Rather skip the build?
We also sell complete kits — fan, duct, adapter, and hose — that connect directly to your ELEGOO exhaust port. See the store if that's easier for you.
Our Products
-
Adapter for ELEGOO Printers 75mm port to 4” Duct
Regular price $29.95 USDRegular priceSale price $29.95 USD -
Inline Exhaust Fan with Speed Control 130 CFM
Regular price $44.95 USDRegular priceSale price $44.95 USD -
Starter Fume Extraction Kit for Resin 3D Printers
Regular price $29.95 USDRegular priceSale price $29.95 USD